Leah Bennett Leah Bennett

0 Kayıtlı Kurs • 0 Kurs Tamamlandı

Biyografi

NSE6_FSW-7.2 New Real Exam, Latest NSE6_FSW-7.2 Test Prep

If you want to advance in this fast-growing technological world, Fortinet NSE6_FSW-7.2 certification is a must. Yet, the common problem the aspiring candidates undergo is seeking updated, authentic, and trustworthy Fortinet NSE6_FSW-7.2 Dumps for the most cherished NSE6_FSW-7.2 certification exam.

Fortinet NSE6_FSW-7.2 (Fortinet NSE 6 - FortiSwitch 7.2) Certification Exam is a professional level certification that validates a candidate's knowledge and skills in deploying, configuring, and troubleshooting FortiSwitch solutions. Fortinet NSE 6 - FortiSwitch 7.2 certification exam is designed for network professionals who are responsible for managing and maintaining FortiSwitch devices in their organizations. Fortinet NSE 6 - FortiSwitch 7.2 certification exam covers a wide range of topics such as FortiSwitch architecture, VLANs, link aggregation, multicast, and security policies.

>> NSE6_FSW-7.2 New Real Exam <<

Latest NSE6_FSW-7.2 Test Prep, Exam NSE6_FSW-7.2 Vce

Our company has dedicated ourselves to develop the NSE6_FSW-7.2 study materials for all candidates to pass the exam easier, also has made great achievement after more than ten years' development. As the certification has been of great value, a right NSE6_FSW-7.2 study material can be your strong forward momentum to help you pass the exam like a hot knife through butter. On the contrary, it might be time-consuming and tired to prepare for the NSE6_FSW-7.2 Exam without a specialist study material. So it's would be the best decision to choose our NSE6_FSW-7.2 study materials as your learning partner.

Fortinet NSE6_FSW-7.2 Certification Exam is an essential credential for IT professionals who want to demonstrate their expertise in the use of the FortiSwitch platform. NSE6_FSW-7.2 exam covers a wide range of topics, and it is designed to test the candidate's knowledge and skills in a real-world context. By earning this certification, IT professionals can demonstrate their value to their employers and advance their careers in the field of cybersecurity.

Fortinet NSE 6 - FortiSwitch 7.2 Sample Questions (Q55-Q60):

NEW QUESTION # 55
Refer to the exhibit.

What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)

A. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
B. Maximum value to accept clients DHCP request is configured as per DHCP server range.
C. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
D. DHCP clients that are trusted by DHCP snooping configured is only one.

Answer: A,C

Explanation:
Based on the DHCP snooping configuration details provided in the exhibit:
B . FortiSwitch is configured to trust DHCP replies coming on FortiLink interface. The configuration segment shows "trusted ports : port2 FlInK1 MLAG0," indicating that the FortiSwitch is configured to trust DHCP replies coming from the specified ports, including the FortiLink interface labeled FlInK1. This setup is critical in environments where the FortiLink interface connects directly to a trusted device, such as a FortiGate appliance, ensuring that DHCP traffic on these ports is considered legitimate.
D . Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN. The "DHCP Broadcast Mode" set to 'All' under the DHCP Global Configuration indicates that DHCP client requests are allowed to broadcast across all ports within the VLAN. This setting is essential for environments needing broad DHCP client servicing across multiple access ports without restriction, facilitating network connectivity and management.

NEW QUESTION # 56
Exhibit.

Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)

A. These two routes will become primary, if the best routes are removed.
B. These two routes are available in the hardware routing table.
C. These two routes will be used as load-balancing routes.
D. These two routes have a higher administrative distance value available to the destina-tion networks.

Answer: A,D

NEW QUESTION # 57
Refer to the exhibits

Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch.
Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)

A. Add VLAN ID 10 as a member of the untagged VLANs on port1.
B. Add the MAC address of PCI as a member of VLAN 10.
C. Remove VLAN 10 from the allowed VLANs and add it to untagged VLANs on port1.
D. Enable Private VLAN on VLAN 10 and add VLAN 20 as an isolated VLAN.

Answer: A,B

Explanation:
The two reasons why port1 can be shut down are loop guard protection and Spanning Tree Protocol (STP).
Loop guard protection: This is a feature that helps to prevent switching loops in a network.expand_more A loop guard can be configured on a port to monitor for specific traffic patterns that indicate a loop. If loop guard protection detects a loop, it will shut down the port to prevent the loop from causing problems.
STP: STP is a protocol that helps to prevent switching loops.expand_more When multiple paths exist between two network devices, STP will block all but one of the paths, creating a loop-free topology.expand_more If STP detects a loop, it will shut down the ports that are involved in the loop.
In the exhibit, both ports 1 and 2 are configured with the same native VLAN 10. This configuration could create a switching loop if both ports are connected to devices on the same network segment. If a loop occurs, loop guard protection or STP could shut down port1 to prevent the loop from causing problems.
Reference:
Fortinet FortiSwitch 7.2 Administration Guide https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/954635/getting-started

NEW QUESTION # 58
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?

A. Enable the FortiLink setting on FortiSwitch before the authorization process.
B. Use a migration tool based on Python script to convert the configuration.
C. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
D. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.

Answer: C

NEW QUESTION # 59
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports. and these ports are connected to endpoints which are powered by PoE. Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?

A. Create new a LLOP-MEO application type to define the PoE parameters.
B. Assign a new LL0P profile to handle different LLDP-ME0 TLVs
C. Add power management as part of LLDP-MED TLVs to advertise.
D. Define an LLDP-ME0 location 10 to use standard protocols for power.

Answer: C

NEW QUESTION # 60
......

Latest NSE6_FSW-7.2 Test Prep: https://www.preppdf.com/Fortinet/NSE6_FSW-7.2-prepaway-exam-dumps.html

Blog

Leah Bennett Leah Bennett

Biyografi

NSE6_FSW-7.2 New Real Exam, Latest NSE6_FSW-7.2 Test Prep

Latest NSE6_FSW-7.2 Test Prep, Exam NSE6_FSW-7.2 Vce

Fortinet NSE 6 - FortiSwitch 7.2 Sample Questions (Q55-Q60):

Hızlı Bağlantılar

Biz kimiz?

İletişim Kurun

Kategori Alt Menü Öğeleri

Kategori Alt Menü Öğeleri

Kategori Alt Menü Öğeleri

Kategori Alt Menü Öğeleri

Blog

Leah Bennett Leah Bennett

Biyografi

NSE6_FSW-7.2 New Real Exam, Latest NSE6_FSW-7.2 Test Prep

Latest NSE6_FSW-7.2 Test Prep, Exam NSE6_FSW-7.2 Vce

Fortinet NSE 6 - FortiSwitch 7.2 Sample Questions (Q55-Q60):